Rockwell Automation 2711 Standard PanelView Operator Terminal User Manual - Manual (Page 15)

15 Publication 2711-UM014G-EN-P - September 2008 15
Preface
Objectives Read this preface to familiarize yourself with the rest of this manual.
•
Intended audience
•
Conventions used
•
Terminology
•
Installing PanelView terminals
•
European Union Directive Compliance
•
Related publications
•
Technical support
Intended Audience No special knowledge is required to understand this manual or
operate the PanelView terminals. Before running an application, you
must know the functions of all screens and screen objects. This
information is available from the application designer.
Equipment installers must be familiar with standard panel installation
techniques.
Conventions The manual uses these conventions:
•
For specific PanelView terminals, PanelView is replaced with the
PV abbreviation. For example: PV1000 refers to the PanelView
1000 terminal.
•
PanelView terminal refers to any one of the PanelView
terminals.
Terminology This manual contains some terms that may be unfamiliar.
Use the Glossary on page 273 of this manual for assistance.
Installing PanelView
Terminals Each terminal is shipped with installation instructions and a panel
cutout. Please follow these instructions when installing your
PanelView terminal in a panel or enclosure.
European Union Directive
Compliance Refer to Appendix C for details on installing the PanelView terminals
in industrial environments requiring compliance with European Union
Directives.