Rockwell Automation 2711 Standard PanelView Operator Terminal User Manual - Manual (Page 157)

Publication 2711-UM014G-EN-P - September 2008 157
Installing the PV600 Terminal Chapter 9
Clearances When installing the PV600 terminal, allow adequate space for
mounting, air flow, maintenance, memory card and legend strip
installation.
PV600 Keypad and Keypad and Touch Screen Terminals
PV600 Touch Screen Terminals
51 mm (2.0 in.) for Mounting and
Wiring Connections 38 mm (1.5 in.) for
Mounting, Air Flow
and Legend Insert
51 mm
(2.0 in.) for
Mounting
and Air Flow
220 mm (8.65 in.) is required
to insert and remove a
memory card with the
memory card retainer.
6.9 mm
(0.27 in.)
91 mm
(3.60 in.)
25 mm (1.0 in.)
for Mounting and
Air Flow
Back Clearance
Side, Top and Bottom Clearances
Memory Card Retainer
Card
Terminal Cutout - Front
View Use full size template
shipped with terminal
38 mm (1.5 in.) for Mounting, Air
Flow and Wiring Connections
25 mm
(1.0 in.) for
Mounting
and Air Flow
132 mm
(5.21 in.)
211 mm (8.30 in.)
is required to
insert and remove
a memory card
with the memory
card retainer.
79 mm
(3.12 in.)
Memory Card Retainer
Back Clearance
Side, Top and Bottom Clearances
Terminal Cutout Use full
size template shipped
with terminal