Rockwell Automation 2711 Standard PanelView Operator Terminal User Manual - Manual (Page 17)

17 Publication 2711-UM014G-EN-P - September 2008 17
Chapter
1
Terminal Overview
Chapter Objectives This chapter gives an overview of the PanelView Operator Terminals.
•
Intended uses
•
Terminal types and features
•
Applications
•
Configuration mode
•
Terminal messages
•
Printing
•
Accessories and replacement parts
Intended Uses You can use the PanelView operator terminals for a wide variety of
machine control and monitoring applications.
Terminal Types PanelView terminals are available in a variety of options.
•
Display size and type (monochrome, grayscale, color)
•
Operator input (touch screen or keypad)
•
Communication port (DH-485, RS-232, remote I/O, DH+,
ControlNet, DeviceNet, Ethernet, EtherNet/IP, DF1)
•
RS-232 printer port support
In addition, some terminals are available with:
•
AC or DC power (L1 at the end of a catalog number indicates a
DC terminal, for example, 2711-B5A1L1, or -T9C1L1).
•
stainless steel bezel available on PanelView 550 keypad or
keypad & touch terminals.
Contact your Allen-Bradley representative for availability.
ATTENTION
Do not use a PanelView terminal for emergency stops or other
controls critical to the safety of personnel or equipment. Use
separate hardwired operator interface devices that do not
depend on solid state electronics. See the inside front cover of
this manual for guidelines.