Rockwell Automation 2711 Standard PanelView Operator Terminal User Manual - Manual (Page 172)

172 Publication 2711-UM014G-EN-P - September 2008
Chapter 11 Installing the PV1400 Terminal
Cutout Dimensions Use the full size template provided with the terminal to mark cutout
dimensions. The illustration below shows reduced size cutouts with
dimensions.
PV1400 Keypad Terminals
PV1400 Touch Screen Terminals
170 mm
(6.70 in.)
305 mm
(12.0 in.)
Ignore stud holes if
mounting terminal
using panel clips.
140 mm
(5.50 in.)
5.56 mm (7/32 in.)
18 holes
419 mm
(16.50 in.)
110 mm
(4.35 in.)
221 mm
(8.70 in.)
38 mm
(1.50 in.)
233 mm
(9.16 in.)
391 mm
(15.40 in.)
305 mm
(12.0 in.)
169 mm
(6.65 in.)
Ignore stud holes if
mounting terminal
using panel clips.
140 mm
(5.50 in.)
127 mm
(5.0 in.)
212 mm
(8.35 in.)
5.56 mm (7/32 in.)
18 holes