Rockwell Automation 2711 Standard PanelView Operator Terminal User Manual - Manual (Page 93)

Publication 2711-UM014G-EN-P - September 2008 93
Configuring the Terminal Chapter 3
PanelView 550 Terminal Screen Setup
Backlight
Turns the backlight On, Off or to Timed mode. When set to Timed,
the Backlight Timeout value determines when the backlight is turned
off.
Contrast
Increases or decreases the display contrast. The contrast settings range
from 0…10.
Video Mode
Toggles between normal video (dark text/graphics on a light
background) and reverse video (light text/graphics on a dark
background). Changes take effect immediately.
Backlight Timeout
Specifies when the backlight turns off if user input or a controller
screen change is not received. The timeout settings are 5, 10, 20, 25,
or 30 minutes. The Backlight Timeout value is used when the
Backlight parameter is set to Timed.
Reset Video
Resets the display to normal (default settings). The reset video [F9] key
is also active on the Configuration Mode menu. If the screen is set to a
non-viewable setting, press the Left and Right arrow keys
simultaneously. Then press [F9] to reset the screen.
IMPORTANT
Certain settings may make viewing the screen difficult. Do not
exit this screen until viewing adjustments are acceptable.
SCREEN SETUP
Backlight
Off
F2
Contrast
F3
Video Mode
F4
Backlight
Timeout
F7
Reset
Video
Reverse
10 min.
F9
10
F10
EXIT