Rockwell Automation 2711 Standard PanelView Operator Terminal User Manual - Manual (Page 78)

78 Publication 2711-UM014G-EN-P - September 2008
Chapter 3 Configuring the Terminal
Exit
Returns to the Configuration Mode menu.
Remote I/O Communication
The remote I/O configuration screen lets you display communication
settings for a remote I/O terminal. Remote I/O settings are configured
with the out-of-box application provided with the terminal or from the
PanelBuilder32 software.
Settings are read only, except for communication rate.
Rack Number (read only)
Displays the current rack number (0…76 octal) of the terminal.
Rack Size (read only)
Displays the current rack size (1/4, 1/2, 3/4, or Full) of the terminal.
Starting Group (read only)
Displays the starting module group of the terminal: 0,1 2,3 4,5 6,7
Pass-through Enabled (read only)
Enables/disables Pass-through which allows you to transfer
applications between a computer on the Allen-Bradley DH+ network
and a terminal on the remote I/O link. A PLC-5 controller passes data
between the two networks.
RIO Configuration
Rack Number:
Rack Size:
Starting Group:
Pass-Through Enabled:
Last Chassis:
Baud:
Full
0,1
Yes
Yes
115.2K F3
No PLC Communication
F16
EXIT
3