Rockwell Automation 2711 Standard PanelView Operator Terminal User Manual User Manual
Page 109
Advertising
Publication 2711-UM014G-EN-P - September 2008
109
Using a Memory Card Chapter 4
4. Press Memory Card Listing, [F1] on keypad terminals, until the
application file you want to load is displayed.
5. Press Restore From Card, [F2] on keypad terminals, to begin the
transfer.
Because this operation overwrites the current application in the
terminal, you are prompted to abort or continue.
Proceed with download?
F1 - Abort|
F2 - Continue
The terminal displays the status of the transfer.
6. When the transfer is complete, the PanelView terminal checks
the validity of the application, resets and runs the application.
In progress ...
Advertising