Rockwell Automation 2711 Standard PanelView Operator Terminal User Manual - Manual (Page 142)

142 Publication 2711-UM014G-EN-P - September 2008
Chapter 7 Installing the PV300 Terminal
Clearances When installing the PV300 terminal, allow space for mounting, air
flow, maintenance, memory card and legend strip installation.
69 mm
(2.73 in.)
134.6 mm
(5.3 in.)
Card
215.9 mm (8.5 in.) is required with card
retainer. Allows 6 mm (0.25 in.) in
clearance) to insert and remove a memory
card with the memory card retainer.
Leave 64 mm (2.5 in.) for
Mounting and Air Flow
Leave 64 mm (2.5 in.) for
Mounting and Air Flow
Memory Card
Retainer
Side, Top and Bottom Clearances
Back Clearance
Recommended Panel
Terminal Cutout
Use full size template
shipped with terminal