Rockwell Automation 2711 Standard PanelView Operator Terminal User Manual - Manual (Page 141)

Publication 2711-UM014G-EN-P - September 2008 141
Installing the PV300 Terminal Chapter 7
Mounting Dimensions The illustration below shows mounting dimensions for the PV300
keypad terminals.
Cutout Dimensions Use the full size template shipped with the PV300 terminal to mark
the cutout dimensions. Below is a reduce size cutout.
140 mm
(5.53 in)
197 mm
(7.76 in)
69 mm
(2.73 in) 82 mm
(3.21 in)
Top View
R 4.5 mm via
(0.178 in.)
178 mm
6.99 in.)
140 mm
5.53 in.)
120 mm
4.71 in.)
109 mm
4.29 in.)
Recommended Panel