Clearances – Rockwell Automation 2711 Standard PanelView Operator Terminal User Manual User Manual
Page 171
Advertising
Publication 2711-UM014G-EN-P - September 2008
171
Installing the PV1400 Terminal Chapter 11
Clearances
Allow adequate space for mounting, air flow, maintenance, adjusting
brightness/contrast, memory card and legend strip installation.
IMPORTANT
If using a memory card, allow a back clearance to load the card.
Leave 51 mm (2.0 in.) for Mounting
Leave 51 mm (2.0 in.) for
Mounting and Air Flow
Leave 51 mm (2.0 in.) for
Mounting and Air Flow
Side, Top and Bottom Clearances
Terminal Cutout - Front View
Use full size template
shipped with terminal
370 mm
(14.58 in.)
3.3 mm
(0.13 in.)
Approximately
400 mm (15.74 in.)
is required to
insert and load a
memory card.
Card
Back Clearance
Advertising