Connecting to an slc, plc, or micrologix 1500lrp, Connecting to a compactlogix or flexlogix – Rockwell Automation 2711 Standard PanelView Operator Terminal User Manual User Manual
Page 205
Publication 2711-UM014G-EN-P - September 2008
205
Terminal Connections Chapter 12
Connecting to an SLC, PLC, or MicroLogix 1500LRP Controller
The following shows a point-to-point connection between the DF1
port of the PanelView terminal and an SLC or PLC controller.
Use an optical isolator or equivalent when grounding level differences
exist between the controller or modem and the PanelView.
Connecting to a CompactLogix or FlexLogix
The following shows a point-to-point connection between the DF1
port of the PanelView and a CompactLogix or FlexLogix controller.
PanelView
DF1 Port
SLC 5/03, 5/04, 5/05
PLC 5
DF1 Port
2711-NC13, -NC14 Cable
2711-NC13, -NC14 Cable
9 to 25-Pin
Adapter
DF1 Port
MicroLogix
1500LRP
DF1 Port
DF1 Port
2711-NC13, -NC14 Cable
CompactLogix
PanelView
FlexLogix
DF1 Port