Rockwell Automation 2711 Standard PanelView Operator Terminal User Manual - Manual (Page 101)

Publication 2711-UM014G-EN-P - September 2008 101
Configuring the Terminal Chapter 3
Set the Time
Use screen buttons (touch screens) or function keys to set the time.
The scratchpad opens to enter each setting. Use the terminal keypad
to enter the values. Press
↵
after each entry. Changes take effect
immediately.
Set the Date
Use screen buttons (touch screens) or function keys to set the date.
The scratchpad opens to enter each setting. Use the terminal keypad
to enter the values. Press
↵
after each entry. Changes take effect
immediately.
Exit
Returns to the Configuration Mode menu.
On PV300, PV300
Micro Terminals On PV550/PV600
Terminals Press On
PV900/1000/1400
Terminals Press To Set
Use the left and right
cursor keys to select
the time or date item
you want to change.
Use the up and down
cursor keys to adjust
the selected date or
time variable. Hours button [F6] Hour button [F9] key Current hour
Minute button [F7] Minute button [F10] Minutes
Second button [F8] Second button [F11] Seconds
Press To
Year button [F1] key Set current year
Month button [F2] Set month (1…12)
Day button [F3] Set day (1…31)