Typical ethernet/ip configuration – Rockwell Automation 2711 Standard PanelView Operator Terminal User Manual User Manual
Page 217
Advertising
Publication 2711-UM014G-EN-P - September 2008
217
Terminal Connections Chapter 12
Typical EtherNet/IP Configuration
The following illustration shows a ControlLogix Controller (with
1756-ENET/B modules), a PLC-5E controller, SLC 5/05, a
MicroLogix/CompactLogix/FlexLogix (with 1761-NET-ENI module),
and an Ethernet PanelView terminal connected to an EtherNet/IP
network. Note that each node has a unique IP address.
MicroLogix, FlexLogix, or CompactLogix
with 1761-NET-ENI Module
10.0.0.2
Hub
PanelView Terminal
Ethernet Port
10.0.0.3
1756-ENET/B
PLC-5E Controller
SLC 5/05
10.0.0.4
Ethernet Cable
ControlLogix 5550 Controller
10.0.0.5
Advertising