Rockwell Automation 2711 Standard PanelView Operator Terminal User Manual - Manual (Page 68)

68 Publication 2711-UM014G-EN-P - September 2008
Chapter 2 Applying Power and Resetting Terminal
For Remote I/O Terminals
An out-of-box application screen opens allowing you to set remote
I/O parameters for the terminal. This screen is only available for initial
setup. Once an application is downloaded, the remote I/O setup
screen is erased.
The table on the next page defines the remote I/O Parameters.
0
PV550 Terminal
PV900 Keypad Terminal