Rockwell Automation 2711 Standard PanelView Operator Terminal User Manual - Manual (Page 55)

Publication 2711-UM014G-EN-P - September 2008 55
Terminal Overview Chapter 1
RS-232 Cables
Remote I/O or DH+ Cable
Cat. No. Description
2711-NC13 5 m (15 ft) connects an RS-232 terminal to the Channel 0 port of an
SLC 5/03 controller or the RS-232 port of a computer or printer.
2711-NC14 10 m (32 ft) cable connects an RS-232 terminal to the Channel 0 port
of an SLC 5/03 controller or the RS-232 port of a computer or printer.
2711-NC21 5 m (15 ft) connects an RS-232 terminal to a MicroLogix controller
(except PV300 Micro).
2711-NC22 15 m (49 ft) cable connects an RS-232 terminal to a MicroLogix
controller (except PV300 Micro).
2706-NC13 3 m (10 ft) cable connects an RS-232 terminal to an SLC 5/03
controller or the RS-232 port of a computer or printer.
1761-CBL-AP00 0.5 m (1.5 ft) cable connects a PanelView 300 Micro RS-232 terminal
to an SLC or PLC.
1761-CBL-PM02 2 m (6.5 ft) cable connects a PanelView 300 Micro RS-232 terminal to
an SLC or PLC.
2711-CBL-PM05 5 m (15 ft) cable connects a PanelView 300 Micro RS-232 terminal to
a ControlLogix, AIC+, SLC controller, or computer RS-232 port.
2711-CBL-PM10 10 m (30 ft) cable connects a PanelView 300 Micro RS-232 terminal to
a ControlLogix, AIC+, SLC controller, or computer RS-232 port.
1761-CBL-AMOO 0.5 m (1.5 ft) cable connects a PanelView 300 Micro RS-232 terminal
to a MicroLogix.
1761-CBL-HM02 2 m (6.5 ft) cable connects a PanelView 300 Micro RS-232 terminal to
a MicroLogix.
2711-CBL-HM05 5 m (15 ft) cable connects a PanelView 300 Micro RS-232 terminal to
a MicroLogix 1000/1200/1500, DeviceNet DNI, or AIC+ module.
2711-CBL-HM10 10 m (30 ft) cable connects a PanelView 300 Micro RS-232 terminal to
a MicroLogix 1000/1200/1500, DeviceNet DNI, or AIC+ module.
Cat. No. Description
1770-CD Shielded, 3-conductor cable (Belden 9463) for connecting a remote
I/O terminal to a remote I/O network.