Rockwell Automation 2711 Standard PanelView Operator Terminal User Manual - Manual (Page 27)

Publication 2711-UM014G-EN-P - September 2008 27
Terminal Overview Chapter 1
PanelView 300 Terminal
Features This section defines features of the PanelView 300 keypad terminal.
PanelView 300 Terminal Features (front)
The following illustration shows the dimensions for the OEM label.
1
2
3
4
5
# Feature Description
1 Function keys (F1…F8) Use the function keys to initiate functions on the terminal display. These keys may have
custom legends.
2 Cursor keys Use the up or down cursor keys to move the cursor up or down in a list or to
increment/decrement values. Use the left or right cursor keys to select an object with an
indicator bar, or to enter configuration mode.
3 Numeric entry keys 0…9 - Enters numeric values.
. Enters a decimal point.
- Enters a negative value.
←
Clears entered digits or cancels the scratchpad.
↵
Stores an entered value.
4 Keypad terminal display Initiate the function of a displayed object, such as an ON or OFF push button, by pressing
the corresponding function key (F1...F8).
5 OEM label option (series B and later) Contact Rockwell Automation or your authorized distributor for custom label information.