Yaskawa MP900 Series Ladder Programming Manual - Manual (Page 192)

5.7 Data Shift Instructions
5.7.6 Table Initialization (SETW)
5-123
Instructions
5
( 3 ) Programming Example
In the following programming example, the area of 1,000 words from MW00000 is initialized to the move data (0) on
the first scan of the high-speed scan after the power is turned ON.
The following table illustrates how the registers are initialized to 0 after execution of the first scan of the high-speed
scan when the power is turned ON.
Register Data
MW00000 0
MW00001 0
: :
MW00998 0
MW00999 0