9 function generator (fgn), 1 ) operation – Yaskawa MP900 Series Ladder Programming Manual User Manual
Page 236
Advertising
5.8 DDC Instructions
5.8.9 Function Generator (FGN)
5-167
Instructions
5
5.8.9 Function Generator (FGN)
( 1 ) Operation
The FGN instruction generates a function based on the parameters specified in the parameter table. It then uses the
function to calculate output value Y based on the value of input X.
The FGN instruction will be for integers, double-length integers, or real numbers, depending on the data type of input
value X. The structure of the parameter table changes accordingly.
Create the parameter table so that X
1
< X
2
< ... < X
N
.
Output value Y is calculated from
input value X for the function
generated by the parameter table.
Output value Y
X
1
X
2
X
3
Y
1
Y
2
Y
3
Input value X
…
…
X
N
Y
N
Function generated by setting X
1…N
,
Y
1…N
in the parameter table.
Advertising
This manual is related to the following products: