Yaskawa MP900 Series Ladder Programming Manual - Manual (Page 37)

3.1 Ladder Program Design Procedures
3.1.7 Transferring Ladder Programs
3-10
4.
Click the Individual Button, then select the Program Check Box. Click the Start Button.
• When an individual transfer is selected, the same file in the Machine Controller will be overwritten with the selected project
file data.
• When a batch transfer is selected, the RAM in the MP2000-series Machine Controller will be cleared before the transfer, and
all project file data will be written in the RAM.
5.
Click the CPU STOP Button. The transfer will start.
INFO