Yaskawa MP900 Series Ladder Programming Manual - Manual (Page 81)

5.2 Relay Circuit Instructions
5.2.5 1-s ON-Delay Timer (TON[1s])
5-12
( 3 ) Programming Example
In the following programming example, the set value of the TON instruction is 5, and the count value is stored in the
DW00001 register.
The DB000001 coil will turn ON after the DB000000 relay stays ON for 5 s.
The timing chart is shown below.
DB000000
DB000001
ON
OFF
ON
OFF
DW00001
5
0
5 s - Ts
(Ts: Scan time set value)