Yaskawa MP900 Series Ladder Programming Manual - Manual (Page 310)

5.10 System Function Instructions
5.10.6 Send Message (MSG-SND)
5-241
Instructions
5
5.10.6 Send Message (MSG-SND)
( 1 ) Operation
The MSG-SND instruction sends a message to a remote station of the specified communications device type on the
specified circuit.
This instruction supports the following communications devices and protocols.
Communications devices: CPU Module, 215IF, 217IF, 218IF, and SVB-01
Protocol: MEMOBUS communications or no-protocol
Communications Device
Protocol:
MEMOBUS or
no-protocol
Data area specified by the first
address of the parameter list and size
M, D, or # registers Communications device:
CPU Module,
215IF,
217IF,
218IF, or
SVB-01
Parameters