6 creating ladder programs – Yaskawa MP900 Series Ladder Programming Manual User Manual
Page 33
Advertising
3.1 Ladder Program Design Procedures
3.1.6 Creating Ladder Programs
3-6
3.1.6 Creating Ladder Programs
Start the Ladder Editor and use the following procedure to create a ladder program.
1.
In the pane on the left, expand the tree under Ladder program. Right-click High-speed and select
New from the menu.
2.
Click the OK Button.
Expand.
Right-click.
Select.
Advertising
This manual is related to the following products: