Yaskawa MP900 Series Ladder Programming Manual - Manual (Page 396)

B.2 Converting CP (Previous) Ladder Programs to New Ladder Programs
B-4
2.
Click Select.
The Conversion of CP ladder Dialog Box will appear.
The check box of the CP ladder program specified in step 1 or the check boxes of the CP ladder programs that are
displayed under the ladder program specified in step 1 will be selected.
When a program from the second hierarchical level is specified in step 1, the check box of the programs of first
hierarchical level will also be selected.
ΠAfter deselecting the check boxes of the CP ladder programs not to be converted in step 3, the check boxes of
the project file, ladder program folder, High-speed, Low-speed, Start, Interrupt, or Function folder to which non-
selected CP ladder programs belong will be shaded. This is because some of CP ladder programs in the file or
folder are selected and the rest are not selected.
3.
Clear the check boxes of CP ladder programs not to be converted.
ΠNew Ladder programs are shaded, and cannot be selected.
4.
Click Conversion. All the selected CP ladder programs will be converted to new ladder programs.
If you click the Cancel Button, the CP ladder program conversion will be cancelled.
An error code (0xAxxxxxxx) and an error name may be displayed in the Output Subwindow in accordance with
the changed program.
Select the error code (0xAxxxxxxx) and press the F1 Key. Error Generating Information will appear.
Check the error causes and take corrective action.
First layer
Second layer