1 how to read the instructions, 1 ) operation, 2 ) format – Yaskawa MP900 Series Ladder Programming Manual User Manual
Page 73: 3 ) programming example, 4 ) additional information
5.1 How to Read the Instructions
5-4
5.1 How to Read the Instructions
This chapter describes each instruction using the following format.
( 1 ) Operation
The operation performed by the instruction is described.
Figures are used to show the operation performed by the instruction.
( 2 ) Format
×: This data type cannot be used.
{: All registers with this data type can be used.
( 3 ) Programming Example
This section gives a ladder programming example that uses the instruction.
( 4 ) Additional Information
This section contains additional information about the instruction. It is omitted if there is no additional information that
is required for the instruction.
Parameter Name
Applicable Data Types
B
W
L
F
A
Index
Constant
The name of the parameter
that appears in the ladder
programs is given.
×
{
{
{
×
{
{
This area shows how the instruction
appears in a ladder program.
Icon:
Shows the icon used in the MPE720.
Key entry:
Shows the shortcut key combination
used in the Ladder Editor.