Hitachi SJ700-2 - Manual (Page 140)

Chapter 4 Explanation of Functions
4 -
77
No. Display condition Parameter displayed when the display condition is met
27 One of C001 to C008 = 05 and A019 = 00 A028 to A035
28 One of C001 to C008 = 06 A038 and A039
29 One of C001 to C008 = 07 A053 to A055 and A059
30 One of C001 to C008 = 08
F202, F203, A203, A204, A220, A244, A246, A247, A261,
A262, A292, A293, A294, b212, B213, H203, H204 and
H206
31 One of C001 to C008 = 08 and A041 = 01 A246 and A247
32
One of C001 to C008 = 08 and A244 = 00 or
01
A241, A242 and A243
33
One of C001 to C008 = 08 and A244 = 03 or
04
H202, H205, H250, H251 and H252
34 One of C001 to C008 = 08 and A244 = 04 H260 and H261
35
One of C001 to C008 = 08, A244 = 03 or 04,
and H202 = 00
H220 to H224
36
One of C001 to C008 = 08, A244 = 03 or 04,
and H202 = 01 or 02
H230 to H234
37
One of C001 to C008 = 08 and A094 = 01 or
02
A295 and A296
38 One of C001 to C008 = 11 b088
39 One of C001 to C008 = 17
F302, F303, A303, A304, A320, A342, A343, A392, A393,
b312, b313 and H306
40 One of C001 to C008 = 18 C102
41 One of C001 to C008 = 27, 28, or 29 C101
42 One of C021 to C008 = 03 C040 and C041
43 One of C021 to C008 = 26 C040 and C111
44 One of C021 to C008 = 02 or 06 C042 and C043
45 One of C021 to C008 = 07 C055 to C058
46 One of C021 to C008 = 21 C063
47 One of C021 to C008 = 24 or 25 C045 and C046
48 One of C021 to C008 = 33 C142 to C144
49 One of C021 to C008 = 34 C145 to C147
50 One of C021 to C008 = 35 C148 to C150
51 One of C021 to C008 = 36 C151 to C153
52 One of C021 to C008 = 37 C154 to C156
53 One of C021 to C008 = 38 C157 to C159
54 One of C021 to C008 = 42 C064
(2) User-setting display mode
The monitor displays only the codes and items that are arbitrarily assigned to user parameters (U001 to
U012), except codes "d001", "F001", and "b037".
(3) Data comparison display mode
The monitor displays only the parameters that have been changed from the factory settings, except all
monitoring indications (d***) and code "F001".
Note that the settings of input span calibration and input zero calibration (C081 to C083 and C121 to C123),
and thermistor input tuning (C085) are not always displayed.