Siemens 440 User Manual
Page 4
Notes
Issue 01/06
MICROMASTER 440 Parameter List
4
6SE6400-5BB00-0BP0
Warning
Please refer to all Definitions and Warnings contained in the Operating Instructions.
You will find the Operating Instructions on the Docu CD delivered with your inverter. If
the CD is lost, it can be ordered via your local Siemens department under the Order
No. 6SE6400-5AD00-1AP0.
Information about MICROMASTER 440 is also available from:
Regional Contacts
Please get in touch with your contact for Technical Support in your Region for questions
about services, prices and conditions of Technical Support.
Central Technical Support
The competent consulting service for technical issues with a broad range of requirements-
based services around our products and systems.
Europe / Africa
Tel: +49 (0) 180 5050 222
Fax: +49 (0) 180 5050 223
Email:
America
Tel: +1 423 262 2522
Fax: +1 423 262 2589
Email:
Asia / Pacific
Tel: +86 1064 757 575
Fax: +86 1064 747 474
Email:
Online Service & Support
The comprehensive, generally available information system over the Internet, from product
support to service & support to the support tools in the shop.
http://www.siemens.com/automation/service&support
Internet Address
Customers can access technical and general information under the following address:
http://www.siemens.com/micromaster
Printed in the Federal Republic of Germany
Siemens-Aktiengesellschaft.
Approved Siemens Quality for Software and Training
is to DIN ISO 9001, Reg. No. 2160-01
The reproduction, transmission or use of this document, or its
contents is not permitted unless authorized in writing.
Offenders will be liable for damages. All rights including rights
created by patent grant or registration of a utility model or
design are reserved.
© Siemens AG 2001 - 2006 All Rights Reserved.
MICROMASTER® is a registered trademark of Siemens
Other functions not described in this document may be
available. However, this fact shall not constitute an obligation
to supply such functions with a new control, or when
servicing.
We have checked that the contents of this document
correspond to the hardware and software described. There
may be discrepancies nevertheless, and no guarantee can be
given that they are completely identical. The information
contained in this document is reviewed regularly and any
necessary changes will be included in the next edition. We
welcome suggestions for improvement.
Siemens handbooks are printed on chlorine-free paper that
has been produced from managed sustainable forests. No
solvents have been used in the printing or binding process.
Document subject to change without prior notice.
Printed in the Federal Republic of Germany
Siemens-Aktiengesellschaft.
!