Lenze E94AxHE Technology Application CiA402 Device profile - Manual (Page 17)

EDS94TA11010xxxx EN 1.2 - 03/2010
L
17
9400 Technology applications | CiA402 device profile
Parameter setting & configuration
Assignment of the I/O terminals
3.2.2 Actual value and status signals
The following tables contain the Lenze assignment of the analog and digital outputs for
the "CiA402 device profile" technology application.
Analog outputs
Digital outputs
State bus
Display elements
Terminal X3 Signal (Lenze setting) Signal configuration
AO1 No signal assigned C03110/1
AO2 No signal assigned C03110/2
Terminal X4 Signal (Lenze setting) Signal configuration
DO1 Brake control (via contactor) C03100/1
DO2 No signal assigned
• The DO2 digital output can be set via the master control via bit 1
of the 0x60FE/1 object (physical outputs).
C03100/2
DO3 No signal assigned
• The DO3 digital output can be set via the master control via bit 2
of the 0x60FE/1 object (physical outputs).
C03100/3
DO4 No signal assigned
• The DO4 digital output can be set via the master control via bit 3
of the 0x60FE/1 object (physical outputs).
C03100/4
Terminal X2 Signal (Lenze setting)
SB State bus
• The state bus can be set to the "Fault" status by the master control via bit 4 of the 0x60FE/
1 object (physical outputs).
• The state bus status can be queried via bit 5 of the 0x60FD object (digital inputs).
User LED Signal (Lenze setting)
No signal assigned
• The user LED can be controlled by the master control via bit 5 of the 0x60FE/1 object
(physical outputs) (0: LED off, 1: LED on).
GA
AO1
AO2
GO
24O
DO1
DO2
DO3
DO4
GE
24E
SB