Lenze E94AxHE Technology Application CiA402 Device profile - Manual (Page 32)

9400 Technology applications | CiA402 device profile
Parameter setting & configuration
Structure of the object descriptions
32
L
EDS94TA11010xxxx EN 1.2 - 03/2010
3.5.3 Objects with write access
Only objects with a check mark (;) in front of the "write access" attribute can be changed
by the user. The Lenze setting for these objects is printed in bold.
 The settings are either selected by means of a selection list or through direct value
entry.
 Values outside the valid setting range are represented in red in the »Engineer«.
3.5.3.1 Objects with setting range
Description structure
3.5.3.2 Objects with selection list
Description structure
3.5.3.3 Objects with bit coded setting
Description structure
Index | Name:
____ | _____________
Data type: _______
Code: _______
Description
Setting range
(min. value | unit | max. value) Lenze setting
; Read access ; Write access CINH PLC-STOP PDO_MAP_RX PDO_MAP_TX
Index | Name:
____ | _____________
Data type: _______
Code: _______
Description
Selection list
(Lenze setting printed in bold)
1
2
3
; Read access ; Write access CINH PLC-STOP PDO_MAP_RX PDO_MAP_TX
Index | Name:
____ | _____________
Data type: _______
Code: _______
Description
Value is bit-coded:
Bit 0
...
Bit 31
; Read access ; Write access CINH PLC-STOP PDO_MAP_RX PDO_MAP_TX