Lenze ETC Motion Control - Manual (Page 217)

Machine constants
Configuration of axes − Correction of axes
MK_SPINDELUMKEHRSPIEL
4
4.12
4.12.1
l
217 EDSTCXN EN 2.0
Data: Each data block has 8 byte of data per axis and contains the actual
correction data. Each correction value is represented by one byte. Thus, on
data block contains 8 correction values per axis. Each correction value has a
value range of −128 ... +127 increments.
0 8 16 24 8(n−1) 8n
X Y Z ... n n: number of axes in the
header
8 correction values nth axis
8 correction values 3rd axis
8 correction values 2nd axis
8 correction values 1st axis