7 starting etc-mmi, Starting etc−mmi, Getting started – Lenze ETC Motion Control User Manual
Page 32
Advertising
Getting started
Starting ETC−MMI
2.7
l
32
EDSTCXN EN 2.0
2.7
Starting ETC−MMI
1. Start the ETC−MMI via <Start>
W
Programs
W
Lenze
W
ETC
ETCN011
The ETC−MMI Gateway is automatically started. The application can be
seen on the task bar:
ETCN001
)
Note!
It can be defined which operating mode is displayed when the
user interface is started. (
¶ 327).
For a detailed description of the MMIs, refer to chapter
"ETC−MMI" (
¶ 286).
For a detailed description of the MMI gateways, refer to chapter
"ETC−MMI Gateway" (
¶ 276).
Advertising