Lenze ETC Motion Control - Manual (Page 237)

Machine constants
List of machine constants
4
4.16
l
237 EDSTCXN EN 2.0
/*−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−*/
/* 5. Technology − specific settings */
/*−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−*/
MK_MFKT_UPR_TABELLE 0, /* table of M functions after which a */
0, /* G22 L9000+Mfktnr is to be added. */
0, /* the table may have a max. of 16 entries */
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0,
0;
MK_WLK_C_GRENZWINKEL 45; /* cutting/sewing: angle up to which the */
/* C axis is to be abruptly fed */
MK_X_WINKEL 0; /* angle of the inclined X axis in */
/* degrees (X−Z plane) */
MK_GEWINDE_VMAX 0; /* thread grinding */
MK_SPINDELMAX_GS1 6000, /* spindle speed in [rpm] at 10 V */
6000, /* for gearbox stage 1 for spindle type 9 */
6000;
MK_SPINDELMAX_GS2 6000, /* spindle speed in [rpm] at 10 V */
6000, /* for gearbox stage 2 for spindle type 9 */
6000;
MK_SPINDELMAX_GS3 6000, /* spindle speed in [rpm] at 10 V */
6000, /* for gearbox stage 3 for spindle type 9 */
6000;
MK_SPINDELDREHZAHLMAX 6000, /* max. permissible spindle speed in [rpm] */
6000, /* (not taken into account by all */
6000; /* spindle handlers.) */
MK_SPINDELDREHZAHLMIN 0, /* min. permissible spindle speed in [rpm] */
0, /* (not taken into account by all spindle handlers) */
0;
MK_TECHNOLOGIEDATEN1 0, /* application−spec. technology param., which */
0, /* lie in the parameter field from P760 */
0,
0,
0,
0,