Lenze ETC Motion Control - Manual (Page 292)

ETC−MMI
Operating ETC−MMI
Passwords
7
7.3
7.3.6
l
292 EDSTCXN EN 2.0
7.3.6 Passwords
In the ETC−MMI, a password can be assigned for each operating mode and
additionally for changing the passwords. These passwords are prompted for
when the ETC−MMIs are started or when the operating mode is changed. The
following passwords are preset:
Operating mode / password administration Password
Setup 1
Automatic 2
Program 3
Diagnostics 4
Edit password 5
Passwords can be changed in the "Diagnostics" operating mode. (
¶ 312).
They are saved in encrypted form in "Lenze.pwd".
)
Note!
If you delete the file "Lenze.pwd" in the "cfg" folder, all
passwords are reset to the standards listed in the table. If you do
not want any passwords to be prompted (e.g. during
commissioning), enter a "space" as password.
7.3.7 Notes, warnings, error messages
Notes, warnings and errors reported in the NC system are shown in a
separate window. The title line displays the name of the control system
reporting the error.
ETCN064
Such a window must be acknowledged with <Enter> before other keyboard
entries are accepted (modal dialogue). The message types are differentiated
by their colours. A blue background indicates a note, a yellow background a
warning and a red background an error. All messages are saved in a log book
file with date and time of the event on the PC and can be accessed in the
"Diagnostics" operating mode. (
¶ 312).