Lenze ETC Motion Control - Manual (Page 281)

ETC−MMI−Gateway
Configuring the ETC−MMI gateway
Trace – Error logbook
6
6.3
6.3.2
l
281 EDSTCXN EN 2.0
6.3.2 Trace – Error logbook
In the case of faults in the communication, you can activate trace logs on this
tab. Gateway traces are internal events of the communication channel
between the application and the gateway and contain information on the
communication flow or the causes of occurred errors. Trace logs are saved in
the file "mmigtway.trc", which is created anew every time the gateway runs
up.
)
Note!
We recommend to deactivate all trace logs in normal operation.
Select the respective control fields to record trace information for the
following events:
OnChannelCreate: Create a new communication channel in the gateway.
OnConnect: Open/close a communication channel.
OnRead: Receive a message via the communication channel.
OnWrite: Send a message via the communication channel.
OnLoadFirmware: Transfer the firmware.
OnFileOpen: Open a file.
OnFileClose: Close a file.
OnMsg2Nc: Send a message to the control system.
OnMsg2Mmi: Send a message to the application (ETC−MMI).
OnError: If an error occurs.
ETCN061
Activated traces are automatically switched on the next time the gateway is
started.