Lenze ETC Motion Control - Manual (Page 225)

Machine constants
Technology−specific settings
MK_DW224_255
4
4.15
4.15.11
l
225 EDSTCXN EN 2.0
4.15.11 MK_DW224_255
This machine constant is used to affect the sequence program of the PLC. The
contents of the 32 entries of this MC are copied in the data area %MW2.224
to %MW2.255 of the PLC during the transfer of the machine constants. The
programmer can freely define the meaning of the data words.
This MC can be used, for example, to configure different pieces of equipment
of a machine with additional components. To create one PLC version only,
the equipment can be recorded in the MCs and the PLC program can react
accordingly.