Lenze ETC Motion Control - Manual (Page 33)

Getting started
Starting ETC−MMI
Switching the language in the ETC−MMI
2
2.7
2.7.1
l
33 EDSTCXN EN 2.0
2.7.1 Switching the language in the ETC−MMI
1. In the ETC MMI window, press <F12> (diagnostics).
The MMI window opens in the "Diagnostics" operating mode.
2. In the ETC−MMI diagnostics window, press <F8> (MMI−config.).
The window "delphmmi.ini" opens (
¶ 283).
EETCN095
3. Specify the language in the line Language:
German: "Lenze"
English: "Lenze_gb"
4. Close the window with <Enter>.
5. Quit and restart the ETC−MMI.