Getting started – Lenze ETC Motion Control User Manual
Page 69
Advertising
Getting started
Creating a PLC sample program
Loading the PLC sample program into the control system
2.12
2.12.3
l
69
EDSTCXN EN 2.0
ETCM038
7. As the control system contains a Motorola processor, the field
"Motorola byteorder" must be set to "Yes". If required, correct this
setting.
8. Close the window with OK.
1. Select Online
W
Communication parameters.
2. Click on New.
ETCM036
3. Specify a name (e.g. network) and select the TCP/IP protocol as
parameter. Click OK.
ETCM040
Connection via network
Advertising