2 starting and configuring the plc sample program, Starting and configuring the plc sample program, Getting started – Lenze ETC Motion Control User Manual
Page 61
Advertising
Getting started
Creating a PLC sample program
Starting and configuring the PLC sample program
2.12
2.12.2
l
61
EDSTCXN EN 2.0
2.12.2
Starting and configuring the PLC sample program
The sample program "Training1" contains
ƒ all settings of the control system,
ƒ the parameterisation,
ƒ the calls for adding the required PLC functions for the M−functions to
the described CNC program.
1. In Windows File Explorer, double−click on the file "Training1.pro".
CoDeSys starts and the sample program is loaded. It consists of a
sequence control (AS) with the steps "Init" and "Main".
ETCN028
Start sample program
Advertising