Lenze ETC Motion Control - Manual (Page 277)

ETC−MMI−Gateway
Starting the ETC−MMI gateway
6
6.2
l
277 EDSTCXN EN 2.0
6.2 Starting the ETC−MMI gateway
The ETC−MMI gateway is started automatically when an application (e.g.
ETC−MMI) loads the file "mmictrl.dll". The current configuration is read from
the file "mmigtway.ini" (
¶ 283) and checked.
In the task bar, an icon for the ETC−MMI gateway is displayed. You can open
the menu with a mouse−click on the gateway icon.
ETCN001 ETCN002
Settings: Start configuration interface.
About: Display version and manufacturer information.
Exit: Close gateway (if there are active connections to an application, a
warning is displayed).