Lenze ETC Motion Control - Manual (Page 308)

ETC−MMI
"Programming" operating mode
File manager
7
7.6
7.6.2
l
308 EDSTCXN EN 2.0
7.6.2 File manager
The file manager provides functions for managing files. When the file
manager is called via the corresponding softkey of the "Programming"
operating mode, a new softkey line is shown, which provides all functions of
the file manager.
ETCN077
In the file manager, different directories can be displayed independently
from each other in the left and right file window. The active file window has
a white background. In the "Directory input field" the directory of the active
file window can be determined. The file filter window makes it possible to
filter the files in the specified directories for the display. The file filter is
applied to both file windows.
In the upper area of the file manager, the available drives and directories are
listed. An entry with two dots ([..]) is a reference to a higher−level directory.
In the lower area, all files in the current directory are listed.
ƒ A dialogue box (button, input field, selection list etc.) can be selected
with the <TAB> key.
ƒ By means of the <Cursor> keys, you approach an element in the
selected dialogue area (e.g. a certain file in the file selection area).
ƒ With the <Enter> key, you execute an action. With <ESC>, you cancel
the action.
General functions