Lenze ETC Motion Control - Manual (Page 287)

ETC−MMI
Installing ETC−MMI
7
7.1
l
287 EDSTCXN EN 2.0
After a standard installation, the following files and file paths can be found
on the hard disk of the PC after a successful installation:
e.g. c:\Programs\Lenze\ETC\MMI\)
Lenze.exe ETC−MMI application
ncform.hlp Help file
install.hlp Installation instructions
...\cfg\ Configuration directory
muster.mk Machine constant file with basic settings
mk.hlp ASCII file, containing help information on setting the
machine constants ("edit MC")
mmi_fehl.db ASCII file containing error messages of the MMI
ncr_fehl.db ASCII file containing error messages of the NC
Lenze.txt ASCII file with general texts, notes, error messages,
information on inputs/outputs and function keys. The file is
required by the user interface.
sps_fehl.db ASCII file containing error messages of the PLC
delphmmi.ini Initialisation or configuration file for ETC−MMI
...\bin\
etc*.rsc ETCHC or ETCPC firmware
spsdummy.prg Example of a PLC program
...\prg\ DIN file index
nikolaus.din Example of a DIN file (profile)
...\log\ Folder for all temporary files which are loaded back from
the control system
e.g. c:\Windows\Systems32
mmigrp32.dll MMI−DLL
mmigtway.exe Gateway program
mmictr.dll Interface for the application
ipcom.dll DLL with internal gateway functions
gtwconf.exe Configuration interface
mmigtwayini Configuration file ^ 283
Installed files