Lenze ETC Motion Control - Manual (Page 314)

ETC−MMI
"Diagnostics" operating mode
7
7.7
l
314 EDSTCXN EN 2.0
Error logbook If errors occur in the communication of PC, PLC, NC
and/or during programming, they are logged together
with date and time in a file (errorlog.txt). By means of
the "Error logbook" function, the error messages can be
displayed. Use the cursor keys to browse through the
individual fields. With <ESC> or <EXIT> the display can
be quit. Errors older than 30 days are removed from the
logbook. The individual columns have the following
meanings:
l No: sequential number
l Source: Indicates the module that reported the error.
l Sev: Indicates the severity of the error (e.g. 1 =
information; 4 = fatal error causing an abort).
l Error no: Clear identification of the error
l Text: Error text from the error text files "*_Fehl.DB"
l Additional text: Additional information of the
module, which gives an indication of the cause of the
message.
The texts of the currently selected error are displayed
again in the lower part. If e.g. an additional text is not
completely visible in the table, it can be read here.
By means of the source filter, a module is selected
whose errors are to be displayed. Select *** to display
the messages of all modules.
Representation of an error log without filter:
ETCN086
Representation of an error log with filter:
ETCN087
When filters are used, additional options for filtering
the messages are offered; for example
for a period of time or the number of messages to be
displayed. With <Import>, the filter settings are
adopted. With <Exit>, the extended filter is closed.