H3C Technologies H3C Intelligent Management Center - Manual (Page 121)

112
7. The DHCP server replies with an ACK-Option 43, which contains the BIMS URL, connection
username, and password.
8. The CPE sends a TR-069 connection request to BIMS.
9. BIMS authenticates the request.
After a virtual CPE passes the authentication, it becomes an available CPE which can be managed
by BIMS practically.
10. When the CPE passes the authentication, BIMS sends the configuration file to the CPE.
11. CPE applies the configuration file and sends the operation event (Success or Fail event) to BIMS.
BIMS operations
The following sections describe the operations you must perform in BIMS for this example.
Quickly adding virtual CPEs to BIMS
In this example, the CPEs to be added are the same model—HP 5820, so they have the same OUI. You
can use a barcode scanner to scan the bar codes on the device packages to quickly add a virtual CPEs
To quickly add virtual CPEs to BIMS:
1. Log on to BIMS as administrator.
2. Click Service > BIMS > Resource Management > Add CPE.
3. On the Add CPE page, click Quickly Add CPE.
4. On the Quickly Add CPE page, specify the basic information of a target CPE, including Serial ID,
OUI, CPE Name, CPE Class, and CPE Group.
5. Click OK.
The CPE HP5820–V1 is added to BIMS as a virtual CPE. At the same time, BIMS clears the Serial
ID and CPE Name fields, reserves other CPE values, and then automatically places the cursor over
the Serial ID text box on the page.
6. To add the next virtual CPE, place your cursor over the Serial ID text box, use a barcode scanner
to scan the serial ID of the second CPE, enter the CPE name as needed, and then click OK.
NOTE:
You can specify a name for each virtual CPE. Or, you can leave the CPE Name field blank, and then
BIMS automatically sets the CPE name as the serial ID of the CPE.
7. Repeat this procedure to add remaining CPEs to BIMS.
For more information, see " Quickly adding CPEs ."
Customizing a startup configuration file for the target CPEs
This example requires you to customize a startup configuration file for all the HP5820 CPEs that will
access the data center network. In BIMS, all configuration files or segments are generated by creating a
configuration template operation.
To create a configuration template:
1. Click Service > BIMS > Configuration Management > Configuration Templates.
The Configuration Templates list appears.
2. Navigate to the folder to which you want to add the configuration template. For example, you can
create a folder for storing the configuration templates to be created.