H3C Technologies H3C Intelligent Management Center - Manual (Page 43)

34
To import a configuration template:
1. Click Service > BIMS > Configuration Management > Config Templates.
The configuration templates and folders stored at the template folder root level are displayed in the
Configuration Templates list.
2. Navigate to the folder where you want to add a configuration template.
3. Click Import....
4. On the Import Configuration Template page, click the Source File to the right of the Source File field,
and then click Browse....
5. In the Choose File to Upload dialog box, select the configuration file (.cfg) you want to import, and
then click OK.
The file you select is imported to BIMS, and you can view the contents of the configuration file from
the Import Configuration Template page.
NOTE:
You can modify the imported information directly on the Import Configuration Template page. For
more information, see "
Creating a configuration template ."
6. Click Select Class to the right of the Applicable CPEs field, and then select the CPE classes from the
Class List to determine which types of CPEs the configuration is suitable to be deployed to. HP
recommends that you only select the CPEs matching the CPEs classes set in the Applicable CPEs list
when deploying the target configuration. For more information, see " Deploying CPE
configurations ."
NOTE:
If you do not configure this parameter, leaving the Applicable CPEs as null, you can select any CPEs
when deploying the target configuration.
7. Enter a description for the configuration template you import.
8. Click OK.
The imported configuration template appears in the selected template folder.
Modifying a configuration template
You can modify any existing configuration templates except those stored in the Default Folder of the
Configuration Template list.
To modify a configuration template:
1. Click Service > BIMS > Configuration Management > Config Templates.
The configuration templates and folders stored at the template folder root level are displayed in the
Configuration Templates list.
2. Navigate to the folder that contains the configuration template you want to modify.
3. In the Configuration Templates list, click the Operation icon associated with the configuration
template you want to modify, and then click the Modify icon from the popup operation list.
The Modify Configuration Template page appears.
4. You can modify the following information: