H3C Technologies H3C Intelligent Management Center - Manual (Page 82)

73
3. Check the following results details:
Task Attributes
{
Task Name—The task name.
{
Creator—Who created the check task.
{
Violating CPEs—The number of violated CPE.
{
Vulnerability Sum—The number of violated rules in the CPE.
{
Task Description—The check task description.
{
Violation Severity—The violation rate of each severity in a chart.
Compliance Policy Check Information
{
Compliance Policy Name—The compliance policy name.
{
Rules—How many rules are included in the policy.
{
Check Results—The check result. The icon means the policy check task succeeded, and the
icon
means the policy check task failed.
{
Violations—The violation contents number.
{
Violating CPEs—How many CPEs violated the specific policy.
{
Severity Level—The most severe alarm level in the specific policy.
You can scroll to the next page by clicking the icon , and go to the last page by clicking the
icon .
4. Close the page to go back to the Task History page.
Viewing CPE Violating Results
1. Click Service > BIMS > Compliance Center > Task History.
2. On the Task History page, click the icon under the Operation column of the target task.
The CPE Violating Results page appears.
3. Check the following results details:
Task Attributes
{
Task Name—The task name.
{
Creator—Who created the check task.
{
Violating CPEs—The number of violated CPE.
{
Vulnerability Sum—The number of violated rules in the CPE.
{
Task Description—The check task description.
{
Violation Severity—The violation rate of each severity in a chart.
CPE Check Information
{
CPE Name—The name of CPE and all belonging policies.
{
Description—The violation details for each policy. You can click the highlighted rule name to
open the Rule Details page.
Check Failure Devices
{
CPE Name—The failed CPE name.
{
IP Address—The failed CPE IP address.