Importing cpe software to bims – H3C Technologies H3C Intelligent Management Center User Manual
Page 47
38
2.
You can set query criteria by the file name of software to search for the CPE software you want to
view.
Enter a partial or full name of the software you want to search for in the Software Name field, and
then click Query to view the matched software in the Software List below.
The Software List provides the following information:
{
Software Name—The name of the CPE software.
{
Software Type—The type of the CPE software, which is always System Software.
{
Applicable CPEs—The types of CPEs to which the CPE software can be deployed.
{
Import Time—The date and time when the CPE software is imported.
{
Make Baseline—Click the Make Baseline icon
to configure one or more software as
baseline software. For more information, see "
Configuring baseline CPE software
{
Rename—A Rename icon for renaming the corresponding software file. For more
information, see "
{
Modify—A Modify icon for modifying the software information. For more information, see
"
{
Export—An Export icon to export the corresponding software from BIMS to your local file.
For more information, see "
."
3.
Click Reset to restore all CPE software.
4.
Click Refresh to view the latest Software List.
Importing CPE software to BIMS
You can add a CPE software to the Software Library by importing a file. Once software is imported to
the Software Library, you can deploy it to the applicable CPEs.
To import CPE software to BIMS:
1.
Click Service > BIMS > Configuration Management > Software Library.
All CPE software is displayed in the Software List.
2.
Click Import....
3.
On the Import CPE Software page, click the Source File to the right of the Source File field, and then
click Browse....
4.
In the Choose File to Upload dialog box, select the target software in your computer, and then click
Open.
The full path and name of the file you select appear in the Source File field.
5.
Confirm the file you want to upload, and then click OK.
The software file name appears in the Source File and Target File fields.
6.
Modify the content in Target File field as needed, which appears as Software Name in the
Software List.
NOTE:
The software name cannot begin or end with a period (.). Spaces in the software name are also not
permitted. In addition, the characters listed in
are not permitted in a software name.
7.
Enter the version of the software you import.