H3C Technologies H3C Intelligent Management Center - Manual (Page 66)

57
a. Click Select CPE, and then select the boxes for the CPEs to which you want to restore the
configurations.
b. Click OK.
The selected CPEs appear in the CPE-to-Deploy list.
c. Select the configuration to be restored from the File Name list for each CPE.
The File Name list displays all backups for the configuration saved before the time point you
specify. By default, the most recent backup before the time point is selected.
7. Click Next.
8. Set the following attributes to specify how the task is executed:
{
Task Name—Enter a task name. By default, the task name is task + current time.
{
Operation Type—Select One-off to create a task that is executed only once. Select Periodical to
create a task that is executed periodically. A Periodical task can be executed monthly, weekly,
or daily.
{
Operation Time—Set the task execution time. The options include:
− Immediately—Execute the task immediately.
− Scheduled—Schedule a date and time to execute the task.
− Quickly—Select this option for creating a task for the NAT CPEs. BIMS can then execute a
restore task to it only when the NAT CPE polls BIMS.
{
Description—Enter the task description.
9. Click OK.
The task you create appears in the Deployment Task List, and the type of the task is Restore
Configuration By Time. For more information, see "
Managing deployment tasks ."
Restoring CPE software to baseline
BIMS allows you to make a version of CPE software as baseline. With this function, you can restore the
current software to the baseline version as needed. Basically, restoring CPE software to baseline involves
creating a deployment task to deploy the baseline software to the target CPE.
To restore CPE software to baseline:
1. Click Service > BIMS > Configuration Management > Configuration Center.
The Configuration Center page appears.
2. Select the check boxes of the CPEs where software is to be restored.
3. Click Restore, and then click Restore Software To Baseline.
The Deploy Software page appears.
4. Configure the task attributes. For more information, see " Deploying CPE software ."
The task you create appears in the Deployment Task List, and the type of the task is Restore Software. For
more information, see "
Managing deployment tasks ."
Managing CPE configurations
From the Configuration Center, you can navigate to the Configuration Management portal of each CPE,
and:
• Set CPE configuration attributes