Epson WorkForce AL-MX300DN - Manual (Page 113)

1. Press the Fax button.
2. Place your original either on the document table or in the Auto Document Feeder. For details on
how to set your original, see “Setting Your Originals” on page 50.
3. Press the Address-book button on the control panel.
The registered recipient list appears in the LCD panel.
4. Press the F4 button to change the sort order, and select your desired recipient using the u, d, l,
and r buttons.
Note:
You can also select a group name for group-dial destinations.
5. Press the F1 button.
Note:
To select multiple recipients, repeat step 4 and step 5.
6. Press the OK button.
Note:
Make the appropriate settings if necessary. For details about the settings, see “Manual faxing” on
page 112.
7. Press the Start button to start the transmission.
Sending faxes using quick-dial
When a frequently used recipient fax number is assigned for the Quick-Dial button (1 to 12), you can
send fax to the recipient by simply pressing the corresponding Quick-Dial button.
Note:
Before using the quick-dial function, you need to register recipient fax information in advance. For
details, see “Registering Recipients” on page 122.
1. Place your original either on the document table or in the Auto Document Feeder. For details on
how to set your original, see “Setting Your Originals” on page 50.
2. Press the Quick-Dial button on the control panel.
AL-MX300 Series User's Guide
Faxing (DNF Model Only) 113