Sending received faxes to memory – Epson WorkForce AL-MX300DN User Manual
Page 118
1. Answer the call with the telephone when you receive a call.
2. Press the Start button.
3. Select Manual Reception and press the Start button.
The received data are printed by page as they are received.
Note:
After Hang Up Receiver is displayed, hang up the handset.
Sending received faxes to memory
When the printer receives a fax, you can temporarily store the data in the printer’s memory without
printing it.
To use this function, the Memory Reception setting in the Reception Settings of the Fax
Settings
menu must be set to Specify Time or Always. For details about the settings, see “Fax
Note:
You can set the start time and end time for the memory perception so that, for example, the faxes received
during the night can be printed the next morning.
1. Press the Fax button.
2. Press the l or r button several times to select the Function tab and press the F2 button.
3. Select On using the u or d button and press the OK button.
AL-MX300 Series User's Guide
Faxing (DNF Model Only) 118