Epson WorkForce AL-MX300DN - Manual (Page 193)

Chapter 9
Replacing Consumable Products/Maintenance Parts
Precautions During Replacement
Always observe the following handling precautions when replacing consumable products or
maintenance parts.
For details about the replacements, see the instructions that come with the consumable products.
!
Caution:
❏ Be careful not to touch the fuser, which is marked with a caution label, or the surrounding
areas. If the printer has been in use, the fuser and surrounding areas may be very hot.
❏ Do not dispose of used consumable products or maintenance parts in fire, as they may explode
and cause injury. Dispose of them according to local regulations.
❏ Provide enough space for the replacement procedure. You will have to open some parts (such as
the printer cover) of the printer when you are replacing consumables or maintenance parts.
❏ Do not install used consumable products or maintenance parts that reach end of service life into
the printer.
For details about the handling precautions, see “Handling the consumable products and maintenance
parts” on page 20.
Replacement Messages
If a consumable product or maintenance part reaches the end of its service life, the printer displays the
following message on the LCD panel or the window of EPSON Status Monitor.
LCD Panel Message Description
Replace Toner Cartridge The toner cartridge has reached the end of its service life.
Replace Photoconductor The photoconductor unit has reached the end of its service life.
Replace Fuser The fuser has reached the end of its service life.
AL-MX300 Series User's Guide
Replacing Consumable Products/Maintenance Parts 193