Epson WorkForce AL-MX300DN - Manual (Page 119)

Sending received faxes to a shared folder
This function is used to convert the received fax data to a PDF format file and send it to a specified
shared folder on the network.
To use this function, the Fax Output setting in the Reception Settings of the Fax Settings
menu must be set to Folder. For details about the settings, see “Fax Settings” on page 155.
Note:
❏ The folder address settings and network settings are also required before using this function. For
details, see “Making transferring settings of received faxes” on page 108.
❏ When the printer receives a fax, the data is sent to the destination registered in Fax to Folder
Settings in the Reception Settings menu. For details about the settings, see “Fax Settings” on
page 155.
Sending received faxes by e-mail
This function is used to send the received fax data as an e-mail attachment by converting the data to a
PDF format file.
To use this function, the Fax Output setting in the Reception Settings of the Fax Settings
menu must be set to E-Mail. For details about the settings, see “Fax Settings” on page 155.
Note:
❏ The e-mail settings and network settings are also required to use this function. For details, see
“Making transferring settings of received faxes” on page 108.
❏ When the printer receives a fax, the data is sent to the destination registered in E-mail Settings
in the Reception Settings menu. For details about the settings, see “Fax Settings” on
page 155.
Forwarding a received fax
This function is used to forward the received fax data to a specified fax destination.
To use this function, the Fax Output setting in the Reception Settings of the Fax Settings
menu must be set to Forward. For details about the settings, see “Fax Settings” on page 155
AL-MX300 Series User's Guide
Faxing (DNF Model Only) 119